Auto Infra-Red Ceiling-mounted Sensor Urinal Flush Valve Kit - Mains Power
Product Code: UF1CMP

  • Dl Pdf
  • This innovative ceiling mounted sensor flushing kit intelligently detects arrival at the urinal and activates 200mL pre-flush. Upon leaving the urinal the 800mL flush activates. Connects directly to mains water supply. It can operate one or two urinals (will flush two urinals simultaneuosly). Available in mains power operation only, not available as battery operated.


    RRP: $1,599.00 inc. GST

    Specifications

    uf1cmp-auto-ceiling-mounted-sensor-urinal-flush-valve-kit.pdf
    1
    Power Input: AC220-240V (50/60 Hz)
    Power Comsumption: 900mA
    Water Pressure: 100kPa-500kPa (recommended 350kPa)
    Inlet/outlet Diameter: 15mm 1/2G
    Detection Zone: 1600X1000mm (adjustable)
    Inductive Confirmation Times: 6 times within 5 seconds
    Confirmation Time after Use: 5 seconds
    Flush Time: 4 seconds (adjustable)
    Reset Time after Flush: 20 seconds
    Trap Seal Protection: Automatic flush every 5hrs if not used
    Flush Delay Time: After user leaves 30 seconds
    Watermark Approved to Australian Standards
    5 Star WELS Approved (1L flush)

    Enquire

    Downloads

    Auto Infra-Red Ceiling-mounted Sensor Urinal Flush Valve Kit - Mains Power